dir Plays all tracks in the current directory/playlist in the order they are on the CD or playlist, then stops. For detailed instructions and descriptions please see the User's Guide located at /support Tracks Navigation Mode Press the TRACKS/MENU button to put the RioVolt in tracks navigation mode. Use the directional navigation controls to navigate within directories, and to select tracks to play. For example: 1. Press the TRACKS/MENU button. The LCD shows directories and tracks. 2. Press

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTIO N RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated‘dangerousvoltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTIO N RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intented to alert the user to the presence of uninsulated‘dangerousvoltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of

If a disc is playing press the STOP button to stop playback before you begin the programming steps below. 1.) Move the FUNCTION selector to CD, insert your disc in the player, close the door, and wait until the total track number appears in the display. 2.) Press the CD PROGRAM button once. The PROGRAM Indicator and program memory “00” begin flashing in the display. 3.) Use the / buttons to select the first track to be programmed. (Example: Track 08). 4.) When track number “08”flashes in the dis

14.) This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus. 15.) Do not overload wall outlet. Use only power source as indicated. 16.) Use replacement parts as specified by the manufacturer. 17.) The product may be mounted to a wall only if recommended by the manufacturer. 18.) Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 1 PD6920_C01070

Replacing The Batteries When the battery symbol flashes in the display the batteries are becoming weak and should be replaced. 4.) Close the battery door, and press the door down make sure fully locked again. 5.) Close the CD door. Always replace both batteries at the same time with new fresh alkaline batteries. Do not mix old and new batteries or different types of batteries together. If the display remains blank when you press the PLAY/PAUSE button, the batteries are completely dead. Replace t

POWER 1 CD RADIO BAND POWER2 21 3.) Tune in to a station. Manual Tuning: SKIP SEARCH Press the or buttons as many times as required until the frequency of the desired station appears on the display. TUNING Automatic Tuning: Hold the or buttons for approximately 2 seconds. The Tuner will begin scanning up or down automatically and will lock onto the next strong signal. 7 PD6900_ib_053102.p65 7 31/5/2002, 17:24 FOR BETTER RECEPTION AMFM Rotate the unit for best reception. Extend the telescopic ant

SEARCHING FOR A PASSAGE WITHIN A TRACK • Keep the FWD or REV button pressed during playback, and release the button as soon as you recognize the desired passage. Normal CD playback will resume from this point. REV. SKIP FWD. SEARCH 10 PD5198_032105.p65 10 21/3/2005, 16:00 REPEAT PLAYBACK This function allows a single track or all tracks on a disc to be played repeatedly. TO REPEAT THE SAME TRACK TO REPEAT THE WHOLE DISC Press the REPEAT button once during Press the REPEAT button twice until play

NOTES: • This unit is capable of playing standard CDs or 3” singles; no adapter is required. • If a disc is inserted incorrectly, dirty, damaged or not present at all, it will not be recognized. • To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for the disc to stop before opening the CD door. Never touch the lens when the CD Compartment Door is open. 6 PD5208 O/M.QXD 8/22/01 4:31 PM Page 7 OPERATING INSTRUCTIONS (CONTINUED) CD PAUSE CONTROL 1 2 During CD pl