Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Califone Dateigröße: 830.54 kb Dateiname: Unterrichtssprache:

The combination for R-1000 or R-2000 could be selected as the following. BASIC COMBINATION SYSTEMR-1000 / R-2000 matches Q-1000 M-1000 BASIC COMBINATION SYSTEM When two or more wireless microphone are used carriers must be different from the others in order to avoid mutual interference. To make sure that the system performs correctly please place the receiver at least 1 meter above the ground and at least 1 meter away from concrete walls or metal surfaces to prevent any reflection. The microphone should also be at least 1 meter away from the receiving antenna as shown in Fig. 5. USED AS MULTI-CHANNEL SYSTEM INSTALLATION OF THE SYSTEM REAR PANEL OPERATION INSTRUCTIONS OF OVERALL SYSTEM 1.POWER SWITCH AND VOLUME CONTROL Turn the knob clockwise until it clicks to switch on the power. Further turning will increase the volume. 2.POWER ON INDICATOR When power is switched on the power on LED will light up. 3.RF SIGNAL INDICATOR Indicates RF signal received. As soon as signal is emitted from the microphone the LED of the indicator will light up. 4.AF SIGNAL INDICATOR Indicates the audio signal. When sound is applied to microphone LED will light up. 5.ANTENNA INPUT JACK For direct mounting of antenna or antenna extension cable. 6.UNBALANCED AUDIO OUTPUT JACK 7.DC POWER SUPPLY INPUT SOCKET A 12-15V external DC power supply or an AC adapter could be connected to this socket while the negative is grounded. CONTROLS AND FUNCTIONS The overall system is a combination of a receiver and a wireless microphone. The combination for R-1000 or R-2000 could be selected as the following. BASIC COMBINATION SYSTEMR-1000 / R-2000 matches Q-1000 M-1000 BASIC COMBINATION SYSTEM When two or more wireless microphone are used carriers must be different from the others in order to avoid mutual interference. To make sure that the system performs correctly please place the receiver at least 1 meter above the ground and at least 1 meter away from concrete walls or metal surfaces to prevent any reflection. The microphone should also be at least 1 meter away from the receiving antenna as shown in Fig. 5. USED AS MULTI-CHANNEL SYSTEM INSTALLATION OF THE SYSTEM REAR PANEL OPERATION INSTRUCTIONS OF OVERALL SYSTEM USED AS A STAND ALONE SYSTEM INSTALLATION OF THE RECEIVER 1.Connect the AF output of the receiver from unbalanced output jack to input jack of the mixer by an output cable attached with "PHONE" plug as shown in Fig. 2. 1.Install an antenna perpendicularly to the antenna input jack at the rear panel of the receiver as shown in Fig. 1. CONNECT 1.Mount the two connected R-1000 or R-2000 into an optional MP-60 panel as shown in Fig. 4. 2.Connect a power adapter to the DC power supply input socket then plug the adapter to an appropriate AC outlet with caution to the correct voltage under both AC outlet and adapter marked. as shown in Fig. 3. USED AS A PACK MOUNT SYSTEM ...

Herunterladen

Geben Sie zwei Ziffern: