long, and an aluminum pole with a tilt mechanism that will angle at a 45 degree angle, left or right. 93660 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at Copyright © 2005 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. UNPACKING When unpacking, check to make sure all parts shown on the back of this instruction sheet are

6 “V” Design Crinkled Panels with LED Lighting Solar Panel Mount 9.33 Ft. Long Cord Batteries 3 Rechargeable “AA” 1.2V 500mAH (Included) Net Weight 31.1 Lbs. Maximum Weight Capacity 400 lb. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry p

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE is used to address practices not related to personal injury. CAUTION, without the safety alert symbol, is used to address practices not related to personal injury. READ AND UNDERSTAND ALL INSTRUCTIONS When using this product, safety precautions sho

NOTICE is used to address practices not related to personal injury. CAUTION, without the safety alert symbol, is used to address practices not related to personal injury. General Safety Rules WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. Work area safety1. Keep work area clean and well a. lit. Cluttered or dark areas invite accide

OUTDOOR EXTENSIONS CORDS. 15. When the equipment is operated outdoors, use only extension cords intended for outside use. See chart under “Extension Cords" for the proper AWG rating depending on the length of the cord(s) being used. STAY ALERT. 16. Watch what you are doing; use common sense. Do not operate any tool when you are tired. CHECK DAMAGED PARTS.17. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its

Failure to do so can result in serious injury. Save this manual. Copyright© 1997 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be

2. Observe work area conditions. Don’t expose to rain unless the wood is properly treated. Keep work area well lighted. 3. Keep children away. Children must never be allowed in the work area during assembly. 4. Store idle equipment. When not in use, the Patio Set must be stored in a dry location to inhibit rust and wear. 5. Use the right tool for the job. Do not attempt to force a small Patio Set to do the work of a larger Patio Set. There are certain applications for which this Patio Set was de

Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before assembly! 1. Watch weather conditions. If using the Car Canopy in windy areas be sure to anchor the legs with cement blocks, sand bags, or other means. This will keep the canopy from being carried away. Do not let snow acc