At the end of the wash cycle Six beeps will indicate that the wash cycle has finished and the cycle indicator light (J) for the cycle will begin to die out. Turn off the appliance using the ON-OFF button. Turn off the water supply to the appliance and open the door. Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better. Setting the Wash Cycle with a Delayed Setting the Wash

Fit the drain plug back. Before Usage Special Reminding To ensure proper and safe use of the water heater, we hereby sincerely declare that users shall contact our designated professional service providers for installation and service. For inappropriate installation, Haier would not undertake any liability. Do disconnect the power supply before any maintenance and repair on the water heater. Unprofessional persons shall not adjust or repair the water heater. Make sure the machine is full of wate

With machine powered on, consecutively press Mode button until it enters Time 1 operation status with delay indication and symbol lighted. Press Set button to enter Time 1 hour setting status with Time 1 hour digits flashing. Press or button to get 10:00. While hour digits are flashing, you can press Set button to confirm and enter Time 1 minute setting. Adjust the value to 10:30 with or button. Then you may press Set button to confirm current settings or wait 6 s after which machine automatical

(Please also screw the shower and tube out of the mixing valve and take note not let the hot water scald yourself. ) And then, drain the water in the tank out. Before the next usage, in order to avoid accidents, it is advised open the hot water valve first before turn on the power supply to let the gas out of the tube. It is not allowed smoking or fire near the open valve. Meanwhile, please make sure that all parts of the water heater are in good condition. 1. 2. 3. Operation Diagram 4. 5.Provid

You can select a power level 850 W, 1300 W or 2150 W. If 850 W is selected, 850 W digits are lighted and only the upper heating element works. If 1300 W is selected, 1300 W digits are lighted and only the lower heating element works. If 2150 W is selected, 2150 W digits are lighted and both the upper and lower heating elements work. In Delay mode, machine defaulted heating power is 2150 W and can't be adjusted. Fig. 8 shows a heating power level 2150 W, the present clock time 12:10, and the real

They are on a label in back of the freezer. Model number Serial number Date of purchase 2 Table Of Contents PAGE Safety Precautions ..........................................................................1 Parts And Features .........................................................................4 Installing Your Freezer....................................................................5 Unpacking Your Freezer..........................................................................5

All foods must be in packages, which do not allow the flow of air or moisture in, or out. Improper storage will result in odor and taste transfer and will result in the drying out of the improperly packaged food. • Follow package or container instructions for proper storage. • Packaging Recommendations: Plastic containers with air tight lids Heavy duty aluminum foil Plastic wrap made from saran film Self-sealing plastic bags • Do not refreeze defrosted/thawed foods. • It is recommended that

garage etc. Your freezer was not designed to operate in temperature settings below 32* Fahrenheit. • Select a suitable location for the freezer on a hard even surface away from direct sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances etc. Any floor unevenness should be corrected. 6 Freezer Features And Use Operating Your Freezer • Once the freezer is in its proper place, plug it in an electrical outlet having 220 volts and 15 amps. • Set the temperature, on the

When using this appliance> always exercise basic safety precautions, including the following: 1 ) Use this appliance only for its intended purpose as described in this use and care guide. 2) This freezer must be properly installed in accordance with the installation instructions before it is used. See grounding instructions in the installation section. 3) Never unplug your freezer by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet. 4) Repair or r

Compressor cycle must be complete to operate. Food temperature appears too warm: • Frequent door openings. • Allow time for recently added warm food to reach freezer temperature. • Check gaskets for proper seal. • Adjust temperature control to colder setting. Food temperature is too cold: • If temperature control setting is too cold, adjust to a warmer setting and allow several hours for temperature to adjust. Freezer runs too frequently: • This may be normal to maintain constant temper